Pipemate Model 1200
The Atlas PipeMate helps produce faster and cleaner welds with a minimum of manual handling and positioning.
Atlas Model 1200 Pipemate
The Atlas Model 1200 PipeMate is a versatile, dual speed
range unit that smoothly rotates 1" to 17" diameter pipe
and tube, weighing up to 1200 lbs. for tack and finish
welding.
The Atlas PipeMate helps produce faster and cleaner
welds with a minimum of manual handling and positioning.
These portable units have a low profile, 9-1/4" H x 18"
L x 8" W, and a covered footswitch for on/off control,
which makes them convenient and comfortable for the
welder working at a shop bench, or for on-site welding.
The dual speed, Atlas PipeMate, and a non powered
companion Idler Rolls unit, will support and turn
properly balanced loads up to 1200 pounds. A built-in,
broad spectrum, high frequency filter prevents any
erratic motor speeds when tig welding. Speed ranges can
be easily changed by removing the front access panel and
manually reversing the gears. A variable speed foot
control option is available. A slow 0-30 ipm or a
faster 0-60 ipm final drive, is powered by a 1/15hp,
115v, AC/DC gear motor. When removing the cover to
change gears, or work on the unit, there is a built-in,
automatic, electrical disconnect that prevents shock.
The Atlas PipeMate and Idler Rolls have two, 6" x 2"
roller bearing wheels with rubber tires providing high
load handling capacity, and heat and abrasion
resistance. A "forward-off-reverse" selector switch; a
speed control dial; and an easily accessible 2 amp fuse,
for motor overload protection, are located on the front
panel. The Atlas PipeMate may also be used with an
Atlas Pipe Dollie as the idler roll, or with
Pipe Jack Stands.
Shown (right) Two (2) AT-FLS, Floor Stands, One (1) AT-1200 Atlas Pipemate & One (1) AT-IR Atlas Idler Roll
Shown (left) AT-FLS Atlas Floor Stand designed to support Atlas Pipemate or Idler Roll